Whether it's a slow leak that's been eating your subfloor for weeks or a flooded basement at 2am, our Converse crews are already moving. Hirex Water Damage sends licensed technicians straight to your Converse address with extraction equipment already loaded and running.

Hirex Water Damage started because homeowners in Converse, TX kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Converse roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Each lead tech holds an IICRC Water Restoration Technician certification and has personally handled clean-water, gray-water, and contaminated black-water losses, so Water Removal in Converse isn't a side service we tacked on — it's the reason the company exists. We carry full general liability coverage and are licensed to operate throughout Converse, TX, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Converse, TX so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Talk to a Converse property manager who's lived through an overnight pipe failure and they'll tell you exactly why a crew that arrives already equipped matters — every extra minute is more water in the framing. That's the gap Hirex Water Damage was built to close, one Converse call at a time.

The most expensive Converse restoration jobs we run almost never started as a dramatic flood; they started as something small that got put off. Here's what tells us a property needs professional attention rather than a mop and a fan:
If you're nodding along to any of these, get ahead of it now rather than later — our Converse dispatcher will give you an honest read on urgency, not a sales pitch.
We size the Converse response to the actual damage — a single-room extraction gets a two-person crew, a commercial loss gets the full fleet — nothing gets a cookie-cutter response.
We arrive with submersible pumps and truck-mount extractors that get standing water out of a Converse property before it soaks deeper into the subfloor. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Our drying plans use moisture meters and thermal imaging to target air movers exactly where hidden moisture is trapped, with daily drying logs so you can see the numbers improving, not just take our word for it.
On the residential side in Converse, we handle the flood-cut, subfloor checks, and content pack-out so your home is ready to rebuild, with clear photo documentation at every stage for your insurance claim.
Converse businesses and property managers get a dedicated project lead, after-hours crews, and equipment scaled to square footage rather than a single-crew response — we know a flooded lobby or a leaking unit above tenants below has to move fast.
When a Converse job involves sewage backup, our team suits up in full PPE, applies EPA-registered antimicrobials, and safely disposes of porous materials that can't be saved.
On top of standard drying, our Converse crews treat affected materials to reduce mold risk and will be upfront if a section needs specialist remediation.

You get a written estimate before any equipment runs, not a mystery total handed to you after the fact.
Because our equipment cache sits inside Converse, TX, most Converse calls see a technician on-site in under 60 minutes.
Our paperwork is built to match what adjusters expect, and we'll speak with your insurer directly on your behalf.
We don't call a job finished until the moisture meter agrees, and if it doesn't, we return at no additional cost.
A short call with our Converse dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
The closest available technician is routed to your Converse property with equipment staged and ready.
We remove standing water first, then map moisture and position air movers and dehumidifiers based on the readings.
Daily moisture checks continue until every affected material reads dry, and you get a complete report at the end.

We measure moisture with instruments, not guesswork, and we won't sign off on a Converse job until those readings match the dry standard for the materials involved. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
You'll find that exact commitment printed on your Converse paperwork, not just mentioned over the phone. A repeat visit under this guarantee doesn't mean starting over — we pull the original moisture logs and pick up exactly where the last visit left off.

"Water heater blew at midnight and the Hirex Water Damage crew had extraction equipment running before 1am. Genuinely fast." — Danielle R.
"They dealt with my insurance adjuster directly and I didn't have to translate a single restoration term myself." — Marcus T.
"Appreciated getting real numbers each day instead of someone just saying 'looks good' and packing up." — Priya S.
"Our restaurant flooded from a line break in the kitchen and they had us back open in three days flat." — Aaron W.
"Nobody wants to call about a sewage backup, but they walked me through the containment and PPE process calmly." — Lena G.
"Final bill matched the estimate to the dollar, which is rarer than it should be in this industry." — Sam O.
Because our equipment is staged inside Converse, TX, most Converse calls see a technician on-site within 60 to 90 minutes of the initial call.
Upfront, written pricing is standard on every Converse job, not an add-on option.
Emergency extraction, structural drying, and sewage/contaminated water cleanup are all available 24/7 for Converse properties.
Yes, we document everything with photos and moisture readings and can communicate directly with your adjuster.
We rely on moisture meters and psychrometric readings, not a guess, before signing off on a Converse job as complete.
Yes, our Converse crews are trained and equipped for Category 3 blackwater response, including PPE and antimicrobial treatment.
Cut power to the affected area if there's standing water near outlets, and avoid walking through it until our Converse tech confirms it's safe.
We scale crews and equipment for commercial Converse accounts and assign a dedicated project lead for anything beyond a single unit.
Drying time varies with material and how quickly extraction started, but 3 to 5 days is typical for most Converse jobs.
Not if it's addressed quickly — mold generally needs 24-48 hours of sustained moisture, which is exactly why fast extraction matters.
We stand behind every Converse job with a documented dry-standard guarantee and a 30-day callback policy.
We cover Converse and the surrounding zip codes listed below, plus neighboring communities throughout Converse, TX.
Converse is our home base, and our reach extends across Converse, TX through a network of staged equipment and on-call technicians. If your address falls inside or near Converse, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Converse, Converse, TXOne call gets you a Converse-based team, not a routed national queue.
Call +1-844-578-1604